[GHOST-FACE]

hi everyone, thank you for this gold mine, this guide is awesome, after having read everything, watched all the videos
Here’s, the list of update a I made :

SLIDE :
-Guarder aluminum slide
-Guarder steel outer barrel
-tanio koba twist Inner Barrel
-NineBall hop up bucking
-Gunsmodify BBU - CNC Glock Blow Back Housing
-Guarder Steel Night Sight
- Airsoft Surgeon Super Hard Loading Nozzle
-Guarder Recoil Spring Guide

FRAME:
-Guarder Original Fiber Reinforced Polymer Frame (TAN)
-Guarder Serial Number Plate
-Guarder Steel Trigger Lever (installed but removed because the cycle was not well, I reinstalled the original)
-Guarder Steel magazine catch
-GunsModify ZERO Hammer (Ver.3)
-Guarder 150% Hammer Spring
-Gunsmodify SAI Aluminum Adjustable Trigger (version 2)
-Guarder Magwell extension
- Stippling on the frame


MAG:
-Nineball gas route seal rubber
-Nineball high bullet valve NEO ‘R’ (not installed yet)

FUTUR UPGARDE :
- SAI slide costa style (black and gold)
- Firefly rocket valve

NOTE
everything is installed correctly, I spent time filing and adjusting all parts, the Glock have a very smooth cycle now.
So with Guarder 150% Hammer Spring, the slide does not block when the magazine is empty, there is not enough gas and power in the charger to block the slide. I have to test with the original Hammer spring.

i have one question, there's really a big difference between the original Hammer Spring and Guarder 150% Hammer Spring, because with the original spring i have a smoother cycle but i don’t have chrony to make test.