Airsoft Canada - View Single Post - 400+ FPS JG ver. 2 Mechbox Survivability?

lurkingknight · September 9th, 2014, 10:31

I predominately use semi only, g36 has seen about 15000 rounds this year, mostly in semi. 13:1 shs with 11.1 30C 1600mah and a lonex a1.

It's been in use like that for 2 years, probably another 10k-15k rounds last year when it pushed my p90 from my go to primary.

the p90 had similar setup but with shs 16:1s and went 2 years with the similar motor and battery, probably higher round count. An odd airseal issue developed and I'm in the process of moving parts around, that gearset is now in my mp5 with a spectre fet, 7.4 60C 4200mah battery. I need to tweak a couple things with it like put the motor from the p90 in rather than use a new motor. I'd say the shs gears would be up to your task.

September 9th, 2014, 10:31	#39
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	I predominately use semi only, g36 has seen about 15000 rounds this year, mostly in semi. 13:1 shs with 11.1 30C 1600mah and a lonex a1. It's been in use like that for 2 years, probably another 10k-15k rounds last year when it pushed my p90 from my go to primary. the p90 had similar setup but with shs 16:1s and went 2 years with the similar motor and battery, probably higher round count. An odd airseal issue developed and I'm in the process of moving parts around, that gearset is now in my mp5 with a spectre fet, 7.4 60C 4200mah battery. I need to tweak a couple things with it like put the motor from the p90 in rather than use a new motor. I'd say the shs gears would be up to your task. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.