|
the g36 motor cage is weak. The lip under the pinion on the motor side where the spring sits in is not very strong or deep what can end up happening is the lip can break or the motor can just move side to side very easily. The only way to fix it is the cnc aluminum g36 motor cage. The pot metal ones are all shitty.
Also that pinion is not happy.
V3s when shimmed too low at the bevel will just wreck the pinion. If you've shimmed it as low as you can go then there's your reason things aren't sounding happy. Bevel to pinion is the proper way to ensure all your gears are happy. Shimming just the gearbox without taking the pinion into account just means you'll strip a bevel or the pinion.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
Last edited by lurkingknight; September 21st, 2014 at 01:34..
|