|
Your post is super confusing so i'll try to make some general suggestions.
1. Field strip, clean any gunk (grease, debris, etc) from the slide and lower frame.
2. If the MAGAZINES are not feeding (the bb's are loaded but do not penetrate the feed lips such that they can escape the hole) remove the base plate and feed lips to expose the spring. Clean the inside (sides, bottom, spring itself) of any grease, debris, etc.
It's highly likely that the bb, bb guide, and debris, is getting caught on the side preventing feeding.
3. Make sure that the magazines have sufficient gas because this is necessary for the function of blowback to re chamber the bb.
|