Airsoft Canada - View Single Post

lurkingknight · March 26th, 2015, 16:10

tienly motors are vented from factory... to cut the vents you'd have to know where the magnets are, so you'd likely need to take the armature out to see where and how much you can take material from.

It's been stated on other forums (asm) that venting the grip plate with the motor will introduce some nice airflow but some believe that the increased flow will introduce lots of crap/debris into the motor can.

March 26th, 2015, 16:10	#6
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	tienly motors are vented from factory... to cut the vents you'd have to know where the magnets are, so you'd likely need to take the armature out to see where and how much you can take material from. It's been stated on other forums (asm) that venting the grip plate with the motor will introduce some nice airflow but some believe that the increased flow will introduce lots of crap/debris into the motor can. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.