Quote:
Originally Posted by CLundy
Honestly it's all based on opinion and budget. I personally love my G&G way better than any other m4 I've used (and yes I've tried kwa and vfc), but when it comes down to it, as previously mentioned, they're all almost the same out of the box. Each gun will perform well for a stock gun, each gun will last long enough if you take good care of it. People will tell you that if you don't have the most expensive gun that you're wasting your time but that's not nessecarily true. If you really want to know which one to get, I would suggest heading to a local store to try them out!
On a side note, I do know that kwa uses some proprietary parts so keep that in mind if you're planning on upgrading.
Hope this helped!
|
It is not opinion. When you build AEGs for people you will understand why all the builders in this thread are saying vfc. I have never had parts not mesh well in a vfc, I've seen about 20 of them now across my work bench. I've had a deepfire that had an upper machined so poorly it won't clear the front pin and has to be hammered apart. I've had G&Ps mysteriously lose air seal if you tighten one screw too much. An SRC 416 with a bent/warped upper that wouldn't fit on the lower. I've had 5 g&g CMs all with cracked gearboxes. I've had a g&g scar with a cracked gearbox, a g&g mp5 with a cracked gearbox. They ALL use the same v2 shell. A CA m4 pistol grip came with 2 slightly different sized screws and the big one ended up stripping out all 4 holes in the bottom of the grip so only that one screw fit.
The only other brand I've not had many build issues with is king arms, but they have their own set of quirks as well regarding external mods.
If your only experience with AEGs is opening the box, putting a battery into it and gaming it, you don't have a foot to stand on telling people their technical experience is opinion.