Airsoft Canada - View Single Post - Screw and the metal piece for an Eotech Magnifier clone?

EOD Steve · July 3rd, 2015, 13:14

I can tell you that the bolt is metric for sure, possibly M4? But you might need a specialty length.
As for the plate, you'll need to match the profile of the mount and also be profiled to fit Picatinny, so good luck. You might be able to scavenge the metal piece off some other old picatinny accessory (carry handle comes to mind)

Come to think of it, you might be able to scavenge everything you need off an old carry handle.

July 3rd, 2015, 13:14	#2
EOD Steve Trader rating Join Date: Jun 2012	I can tell you that the bolt is metric for sure, possibly M4? But you might need a specialty length. As for the plate, you'll need to match the profile of the mount and also be profiled to fit Picatinny, so good luck. You might be able to scavenge the metal piece off some other old picatinny accessory (carry handle comes to mind) Come to think of it, you might be able to scavenge everything you need off an old carry handle. __________________ The Steve has spoken. Last edited by EOD Steve; July 3rd, 2015 at 13:17..