Airsoft Canada - View Single Post - King Arms M4 Feeding Problems + Ammo Problems

AnthonyG · October 24th, 2015, 20:37

There were definitely multiple factors at play; before I fixed my nozzle I was getting mis-feeds and double feeding in all of the "green" scenarios above.

Now I've narrowed it down to a game of mag type + ammo type.

The mags are pretty sturdy (almost no wobble) with the velcro mod, and it's only the MAG brand mags that are "un-seating" themselves. I suspect this is a problem with the mag release and the location of the notch in the side of the MAG mags where they are held in place.

Edit: This thread has taken a turn since the problem isn't my gun any more.
I might post my chart as a separate thread, or post in another thread dealing with ammo/mag problems.

October 24th, 2015, 20:37	#23
AnthonyG LUser Title Trader rating Join Date: Aug 2014 Location: Pickering/Toronto	There were definitely multiple factors at play; before I fixed my nozzle I was getting mis-feeds and double feeding in all of the "green" scenarios above. Now I've narrowed it down to a game of mag type + ammo type. The mags are pretty sturdy (almost no wobble) with the velcro mod, and it's only the MAG brand mags that are "un-seating" themselves. I suspect this is a problem with the mag release and the location of the notch in the side of the MAG mags where they are held in place. Edit: This thread has taken a turn since the problem isn't my gun any more. I might post my chart as a separate thread, or post in another thread dealing with ammo/mag problems. Last edited by AnthonyG; October 24th, 2015 at 20:42..