Airsoft Canada - View Single Post

Rossco66 · December 29th, 2015, 15:58

Apparently this result is insufficient for American Milsim.

They suggested a drop of JB Weld which can be easily filed off after the event is over. This seems like a smart compromise over removing any material from the rifle itself.

I've never worked with this stuff before but I'm assuming a drop or two of it to create a mound that will prevent the selector lever from moving into the full auto position will do the trick.

I can then reset the mosfet to 100% ROF

December 29th, 2015, 15:58	#11
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	Apparently this result is insufficient for American Milsim. They suggested a drop of JB Weld which can be easily filed off after the event is over. This seems like a smart compromise over removing any material from the rifle itself. I've never worked with this stuff before but I'm assuming a drop or two of it to create a mound that will prevent the selector lever from moving into the full auto position will do the trick. I can then reset the mosfet to 100% ROF __________________