|
The inner barrel is 6.04 mm's and I cant do a pick of the barrel right now because my camera is on the fritz. I can tell you that its brass on the outside with a titanium inner and it was made by the "Q Project" in California.
I did some accuracy tests with it and here are my results (all tests done with the gun "benched" and using 10 rounds of .20);
25 feet- 1 inch groupings (1 big hole in the paper)
50 feet- 2 inch (1 stray 5 inches from the group)
I also performed the pop can test on this gun and it shot right through the bottom of a coke can. I just dont remember exactly how fast that means, but im pretty sure thats over 400 fps.
|