Quote:
Originally Posted by #lovemachine
Try removing the stock pad as well as the rear and middle body pins.. swing the body up and you should see a part that has two screws near the right hand side of the gun.
Loosen up the screws a little while pressing on the mag release until it resets correctly.. the mags should release/lock in without further problems.
|
Quote:
Originally Posted by spartan117
the magwell on pdr is a bit tight. Push the mag up into the gun more to alleviate some pressure on the mag catch then while doing all that try pressing the mag release and pull the mag out
|
These are both things I've read elsewhere, and I'm afraid they haven't worked. I've even had a friend help me pull, while holding the release down.
https://youtu.be/PDbh7o1lYaU
I've also tried pressing the mag release manually on the gearbox, with no luck. It just seems like the mag release isn't coming out enough to let go. It also seems like nobody else has had this problem.
Thanks guys.