Airsoft Canada - View Single Post

DropHack · February 29th, 2016, 18:06

Recently I placed an O ring in front of the hop up, in place of the spring, as the hop up was occasionally shifting forward on shots causing a leak and the shot to lose velocity. The O ring solved the fps inconsistency but now the aeg will only feed every second bb. Could this be fixed using a sector delayer?

Internal Parts
Guarder Infinite Torque-Up Motor
SHS 13:1 gears
3034 Mosfet
Stock ICS tappet
ICS Orange Piston
Element double O-ring cylinder head
SHS AK Long Nozzle

The SHS nozzle is only a few hundred microns ( ~300) shorter than the stock ICS nozzle but gives much better airseal than the stock nozzle.

February 29th, 2016, 18:06	#1
DropHack Trader rating Join Date: Sep 2014 Location: Toronto, Ontario	ICS M4 Feeding Problems Recently I placed an O ring in front of the hop up, in place of the spring, as the hop up was occasionally shifting forward on shots causing a leak and the shot to lose velocity. The O ring solved the fps inconsistency but now the aeg will only feed every second bb. Could this be fixed using a sector delayer? Internal Parts Guarder Infinite Torque-Up Motor SHS 13:1 gears 3034 Mosfet Stock ICS tappet ICS Orange Piston Element double O-ring cylinder head SHS AK Long Nozzle The SHS nozzle is only a few hundred microns ( ~300) shorter than the stock ICS nozzle but gives much better airseal than the stock nozzle.