Airsoft Canada - View Single Post

Drakker · July 14th, 2016, 10:27

On my VSR all it took was some force, the thread locker they used wasn't very strong, but that's like 4 or 5 years ago.

Depending on the quality of the thread locker, gently attempting to turn the screw both ways repeatedly could weaken it. Make sure you have a perfectly sized screw driver as to not strip the screws.

Small shocks can also help loosen the thread locker, you can gently tap the screw with something not too heavy.

July 14th, 2016, 10:27	#7
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	On my VSR all it took was some force, the thread locker they used wasn't very strong, but that's like 4 or 5 years ago. Depending on the quality of the thread locker, gently attempting to turn the screw both ways repeatedly could weaken it. Make sure you have a perfectly sized screw driver as to not strip the screws. Small shocks can also help loosen the thread locker, you can gently tap the screw with something not too heavy. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.