Airsoft Canada - View Single Post

ThunderCactus · December 31st, 2016, 23:13

when you've finished shimming the sector gear, put the screws in the mechbox, then press the air nozzle in. Should move in and out freely. If you're shimmed the sector gear too high, it'll jam up.

December 31st, 2016, 23:13	#7
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	when you've finished shimming the sector gear, put the screws in the mechbox, then press the air nozzle in. Should move in and out freely. If you're shimmed the sector gear too high, it'll jam up.