did they fix the issue where if you don't shim the selector the plate actually doesn't make good contact with the selector microswitch on the trigger board? You need to add a layer or two of tape onto the selector plate in most cases. When you tip the gun over the plate is actually falling away from the micro switches. When no contact is made, the gun defaults to full auto I believe. Which is kind of a dumbass way to program. Semi auto would be a far more effective failsafe fire mode... or not at all.
Quote:
|
Also check your cutoff lever for wear and that the gear is actually catching it when you lean the gun over...also a shimming problem. When the gun leans over, if there's slop in the side to side play the gear may be dropping and failing to engage the cutoff lever.
|
There is no cutoff lever in a spectre equipped gun.