|
If you don't care about performance and reliability as much;
The WE M4's and 416s are the closest to "1:1" and will accept most RS parts, obviously the top is a ViperTech but those cost the same prices as the real thing.
GHK is a great platform, with great reliability and cool-down; unfortunately not all RS parts will fit on it in my experience.
WE's rifles are good for the most part, their down fall is their magazines. (Cool down and their poor performance in colder weather.) The Canadian mark up is also rape on these rifles, to the point where if you spent a little more for retail, you'd be better off with a GHK.
GHK is the best OOTB IMO; parts are dirt cheap from samoon (replacement parts whenever you need them); front cost will cost you a bit, but they are importable with their stock FPS at 380-400 (10.5-14.5"+)
GHK has a 1J nozzle, which brings you down to 350-360 FPS; WE can use a "FG" disc, or an NPAS which you can dial respectively, but users all over have inconsistent FPS issues with the NPAS.
Maintenance is the same all GBBs; keep the clean after use, and keep them semi lubed with silicoin oil; and keep the mags filled with a little bit of GG.
Unfortunately, GBBS are all wear and tear, so at some point you will have to replace parts, and o-rings.
|