|
hand feed the gun upside down if bbs don't drop into the chamber, your nozzle is too long. If you have to press on the stack to get them in, the nozzle is too long. Nozzle length should be confirmed by comparing the original to the new one and even then, the best way is still to measure with a set of calipers.
ICS is a marui clone, nozzle is generally around 20.40mm A marui spec m4 nozzle is around 21.40
If you compare lonex mp5 nozzle to lonex m4 nozzle, you get 20.23mm and 21.26
That is a full mm off on both comparisons.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|