Quote:
Originally Posted by BobbyDangerous
You tried swapping back to the original piston or tried another piston?
You can over compress too. I did it in my EBR. I had a double o-ring piston head and new piston and for the life of me couldn’t figure out why I was shooting way less than it should have. Until I swapped the piston and piston head. I had serious compression but it was too much for it to handle. I’m guessing most of the air was blowing out the Hopup into the magazine. Almost like I was getting back pressure.
|
Don’t have another piston/piston head. Figured if a lot of builds use SHS 14 Tooth Swiss cheesed pistons and I use an aluminum piston head, then it should be fine.