Airsoft Canada - View Single Post

aftica · October 13th, 2005, 16:10

so the ''gas block'' does not fit into the slide? try this : try to push it into the slide, then remove it and look for marks on the block where it is contacting the slide. remove some material here with a finger file,emery,dremmel or whatever. usually, it will just be edges and sharp corners on the block that are the problem.

October 13th, 2005, 16:10	#2
aftica Trader rating Join Date: Apr 2004 Location: clarington ont.	so the ''gas block'' does not fit into the slide? try this : try to push it into the slide, then remove it and look for marks on the block where it is contacting the slide. remove some material here with a finger file,emery,dremmel or whatever. usually, it will just be edges and sharp corners on the block that are the problem.