Airsoft Canada - View Single Post

DonP · November 5th, 2005, 13:05

If you have a small amount of electronics and mechanical skills, an Airsoft quality one can be made from one of those G&P or CA laser sights. Buy an IR laser (just the component - the high wavelengths can get very expensive, but the lower range is not so bad) and replace the laser unit inside.

I did this with a CA laser sight a few years ago. Works fine, but at the time I paid probably around 80-100 for the laser sight in the first place, and another 100 for the IR laser.

November 5th, 2005, 13:05	#6
DonP Trader rating Join Date: Jul 2002 Location: Edmonton, AB	If you have a small amount of electronics and mechanical skills, an Airsoft quality one can be made from one of those G&P or CA laser sights. Buy an IR laser (just the component - the high wavelengths can get very expensive, but the lower range is not so bad) and replace the laser unit inside. I did this with a CA laser sight a few years ago. Works fine, but at the time I paid probably around 80-100 for the laser sight in the first place, and another 100 for the IR laser.