Airsoft Canada - View Single Post

Gryph · November 5th, 2005, 19:12

It could be that the O-ring slipped off. Take off the slide and pull forward the nozzle, it should be in a groove. If not, it's been displaced and sitting on the metal assembly in the rear.

November 5th, 2005, 19:12	#2
Gryph Trader rating Join Date: Nov 2004 Location: Montreal, QC	It could be that the O-ring slipped off. Take off the slide and pull forward the nozzle, it should be in a groove. If not, it's been displaced and sitting on the metal assembly in the rear. __________________ D.O.W Gryph TM P90, TM G36C, TM P226