Airsoft Canada - View Single Post

mcguyver · December 11th, 2005, 11:03

i use to use carbide tipped bits for my router when working with aluminum. the sheets were 1/8 inch thick layered onto mdf and the router cut no problem. after about 96 feet of cutting the bit barely showed any wear, so i'd say it should be ok.

December 11th, 2005, 11:03	#3
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	i use to use carbide tipped bits for my router when working with aluminum. the sheets were 1/8 inch thick layered onto mdf and the router cut no problem. after about 96 feet of cutting the bit barely showed any wear, so i'd say it should be ok.