|
Does the KJW Glock mags have the same type of baseplate that slides forward to expose the fill valve? If so, you can remove the plate completely and knock a pin out (KSC is like that) that you can pull out the spring base, spring and follower (that is the part you broke, the follower). A fix? Well, if you have access to small set screws and a tap/die set, you can drill a small hole in the follower, tap it for a #2-56 or #4-40 set screw that is short enough to sit in the groove without interferring with the action, that itself will give you purchase to pull the follower down to load the mags.
|