Airsoft Canada - View Single Post

CDN_Stalker · January 19th, 2006, 12:10

One of my boys, Quantis, is looking to start making some homemade supressors, I got him the 1.5" aluminum bar stock, figured I'd slice it and have it bored for him since he has little in the way of metal working tools. I don't have a tap to go by, so I figured I'd ask on here so I can tell the machinist what size bit to use to bore it properly, then I'll cut the slices.

Thanks

Stalker

January 19th, 2006, 12:10	#1
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	What size drill bit for a 14mm tap? One of my boys, Quantis, is looking to start making some homemade supressors, I got him the 1.5" aluminum bar stock, figured I'd slice it and have it bored for him since he has little in the way of metal working tools. I don't have a tap to go by, so I figured I'd ask on here so I can tell the machinist what size bit to use to bore it properly, then I'll cut the slices. Thanks Stalker __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871