Airsoft Canada - View Single Post

Oberst39 · January 20th, 2006, 16:08

Hey all, anyone who owns a Marushin Kar98 might discover after a while that when retracting the bolt to extract the shell, the shells may not be extracting as expected. What I did to rectify this problem was to replace the extractor on the bolt which is made out of plastic with a real extractor from a K98 bolt. It fits fine with a tiny bit of effort to place it on the bolt extractor collar. You may have to work the bolt in the receiver a few times back and forth but after that everything seems to work fine. Also, there are alot of complaints regarding the real K98 strippers not fitting in this rifle. With a very fine file, you can file the reciever down a tiny bit to allow the stippers to fit. You will not be able to tell this was done by looking at the reciever and the real strippers work wonderfully.

January 20th, 2006, 16:08	#1
Oberst39 Trader rating Join Date: Nov 2005 Location: Beautiful British Columbia	Replacing extractor on Marushin Kar98 Hey all, anyone who owns a Marushin Kar98 might discover after a while that when retracting the bolt to extract the shell, the shells may not be extracting as expected. What I did to rectify this problem was to replace the extractor on the bolt which is made out of plastic with a real extractor from a K98 bolt. It fits fine with a tiny bit of effort to place it on the bolt extractor collar. You may have to work the bolt in the receiver a few times back and forth but after that everything seems to work fine. Also, there are alot of complaints regarding the real K98 strippers not fitting in this rifle. With a very fine file, you can file the reciever down a tiny bit to allow the stippers to fit. You will not be able to tell this was done by looking at the reciever and the real strippers work wonderfully. __________________ "A man should remember that he is not born solely for his own sake, but for his country, and for his family."