Airsoft Canada - View Single Post - FIXED

Treadstone71 · January 25th, 2006, 20:37

Ok, I figured it out...my loading muzzle was getting jammed in the breech because the whole inside of the breech dried out.

I used a q-tip to get the gunk out, then used a clean q-tip covered in 70 wt silicone oil to coat the insides of the breech, and the tail end of the muzzle.

Worked the system in a bit, reassembled it and now it's fine. Perhaps this could be added to the gas gun solutions section?

January 25th, 2006, 20:37	#4
Treadstone71 Ain't gay, but $20 is $20 Trader rating Join Date: Sep 2002 Location: Downtown Toronto	Ok, I figured it out...my loading muzzle was getting jammed in the breech because the whole inside of the breech dried out. I used a q-tip to get the gunk out, then used a clean q-tip covered in 70 wt silicone oil to coat the insides of the breech, and the tail end of the muzzle. Worked the system in a bit, reassembled it and now it's fine. Perhaps this could be added to the gas gun solutions section? __________________ Remember kids, go down the road, not across the street! Here's a sharp knife, have fun!