Airsoft Canada - View Single Post

mcguyver · March 2nd, 2006, 23:26

If you have a local store that stocks parts, head down there with your selector plate. Compare them to different brands if you can by putting them side by side and comparing the notches in the top where the "yaw control bar" sits. The one with the front wall of the notch sitting farther towards the rear of the selector than your selector is the one you'd want.

If you don't have a shop local to you and must order it, try to get one from C.A. first. Unfortunately, you may have to try more than one to get it right, or try to "modify" yours to work.

I don't do "jerry-rigging" to parts to make them work. I just get the correct part. But I have a store local to me so I have no problems with that.

March 2nd, 2006, 23:26	#23
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	If you have a local store that stocks parts, head down there with your selector plate. Compare them to different brands if you can by putting them side by side and comparing the notches in the top where the "yaw control bar" sits. The one with the front wall of the notch sitting farther towards the rear of the selector than your selector is the one you'd want. If you don't have a shop local to you and must order it, try to get one from C.A. first. Unfortunately, you may have to try more than one to get it right, or try to "modify" yours to work. I don't do "jerry-rigging" to parts to make them work. I just get the correct part. But I have a store local to me so I have no problems with that. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.