|
well first off im not the person to tell you how do take the blow back chamber out of your gun. first find somone who can give you direction. after you have it out all the rust remouved and cleaned of all oil i would use tremclad rust paint. you can get it in a small tin at home depot. not the spray use the kind you brush on. then put 1 or 2 coats on. you just want to make sure that you dont put it on to thick or it could inhibbit moving parts. also make sure to not get paint on any plastic or ruber parts it could eat them. graylocks is right though id use 0000 steel wool vs sand paper
__________________
To live is to Die
|