Airsoft Canada - View Single Post - Sanding slide down to stainless? Easy or not?

Gooseman · March 24th, 2006, 11:27

I've sanded down several slides in the past and as previously mentioned, start with a higher grit sandpaper like 120 (to remove the hard outer coating which is USUALLY anodized layer), and then move down to around 400. After 400, switch to mild steel wool and it should look wicked.

March 24th, 2006, 11:27	#8
Gooseman Trader rating Join Date: Mar 2003 Location: if u dont like my sidewalk, get off my driving	I've sanded down several slides in the past and as previously mentioned, start with a higher grit sandpaper like 120 (to remove the hard outer coating which is USUALLY anodized layer), and then move down to around 400. After 400, switch to mild steel wool and it should look wicked.