Airsoft Canada - View Single Post

noldevin · May 1st, 2006, 21:15

Recently my trigger has stopped springing back forward. Ok, no problem, I opened it up and re aligned the spring so it pushes the trigger forward. But now when I test it, i load the clip, cock it, and fire one shot, then the following trigger pulls just click the hammer forward and nothing happens. If i pull the slide back and push the little gas release valve pusher back up, I can get one more shot out of it before I have to do that again.
Is there some sort of spring that is supposed to reset that thing that I may have lost? Or is something else connected improperly? I tried numerous types of lever springs but none fit it so that it would be pushed back into place. Any help would be appreciated, thanks. :salute:

May 1st, 2006, 21:15	#1
noldevin Trader rating Join Date: May 2006 Location: USA	hfc m92 fmv problem Recently my trigger has stopped springing back forward. Ok, no problem, I opened it up and re aligned the spring so it pushes the trigger forward. But now when I test it, i load the clip, cock it, and fire one shot, then the following trigger pulls just click the hammer forward and nothing happens. If i pull the slide back and push the little gas release valve pusher back up, I can get one more shot out of it before I have to do that again. Is there some sort of spring that is supposed to reset that thing that I may have lost? Or is something else connected improperly? I tried numerous types of lever springs but none fit it so that it would be pushed back into place. Any help would be appreciated, thanks. :salute: