|
Installing a Deans connector helps. The whole thing (both sides) are about half the size of the white large connectors.
I installed a Star Cran stock a few weeks back, with the 9.6V battery that was made for it, I had to slice off about 1/8" off the end of the supplied buffer tube, and had to slice off the battery grabbing piece on the inside of the buttstock. Also cut one wire and respliced it, took 2 " off it. Was able to fully retract and extand the stock without any problems. Took me a while to figure these things out on this one, even after having installed 4 previous Crane stocks of various makes (G&P, earlier Star variant, etc.)
|