Airsoft Canada - View Single Post - my D-90-H =jammed

MadMax · June 8th, 2006, 17:29

If the Well is a clone to the TM P90, your best bet is to remove the front end before attempting to unclog the barrel. With the front group removed, the mechbox nozzle wouldn't block the bb passage.

If you don't have a clearing rod, you're going to have to make one. Try cutting a wire coat hangar and bend the wire stock straight. Wrap the tip in several layers of tape so it doesn't scratch the inside of the barrel and use the makeshift clearing rod to push the bbs out.

Stick to better grade pellets which are less likely to jam. Low grade pellets may mostly be round, but there are a few obround or very badly shaped pellets which may jam your barrel and have additional rounds packed in.

June 8th, 2006, 17:29	#17
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	If the Well is a clone to the TM P90, your best bet is to remove the front end before attempting to unclog the barrel. With the front group removed, the mechbox nozzle wouldn't block the bb passage. If you don't have a clearing rod, you're going to have to make one. Try cutting a wire coat hangar and bend the wire stock straight. Wrap the tip in several layers of tape so it doesn't scratch the inside of the barrel and use the makeshift clearing rod to push the bbs out. Stick to better grade pellets which are less likely to jam. Low grade pellets may mostly be round, but there are a few obround or very badly shaped pellets which may jam your barrel and have additional rounds packed in. __________________ Want nearly free GBB gas?