Quote:
|
Originally Posted by Erik_james
Well...I was fireing propaine through it, because when I recieved the gun had a small crack on the back so I figured I would be replacng the slide soon, so I ran propaine through it until I replaced it. Then it worked fine for about a month, then the slide stopped blowing back all the way, and now it will work occasionaly, but it has never worked when i've pulled it out at a game so I dont trust it anymore. I still fires 2 shots on one trigger pull, and the slide wont blowback all the way sometimes, sometimes it will fire in bursts, and sometimes all the gas will come out as soon as I instert the mag into the gun. There's just no fixing it.
Erik
|
Sounds like a pressure problem to me. The fact it's firing auto like that... it's not disconnecting. Basically slam firing. Somethings up with the slide not going back far enough, like when you're running low on gas, except you aren't low on gas so it fires a burst.
Maybe a seal's blown in the blowback mechanism, or it wasn't reassembled just quite right when you put on the new slide... but either way 1911s are nice simple designs, I find it hard to believe no one was able to figure out the problem.