Airsoft Canada - View Single Post

Dallas · August 8th, 2006, 03:00

Hi i jsut got my ICS AK 74M and the screw holding the grip covering the moter was loose but i didn't notice it. The screw is long gone, so i took one from were the stock is held on because it seemed to be ok with jsut one since the stock snaps in. after i screwed that in it and hook the battery back up and shoot. the thing makes a wired noise and just stops. so i took the motor mount apart and the motor looks ok but there is a tiny plate that falls out and i soon find that the onld screw holding the grip over the moter had been stripped right off and i had screwed the stripped piece right up and this is what i beleive happened since there were scratch marks on the little plate. so then i soon find that i have blown a fuse, i thought my motor was fried can any one explain this to me? Thanx. O, and i am using a 8.4 3600mah battery, and it has a 30A 250V fuse in it.

August 8th, 2006, 03:00	#1
Dallas Trader rating Join Date: Mar 2006 Location: Weyburn Sask	My ICS AK 74M Hi i jsut got my ICS AK 74M and the screw holding the grip covering the moter was loose but i didn't notice it. The screw is long gone, so i took one from were the stock is held on because it seemed to be ok with jsut one since the stock snaps in. after i screwed that in it and hook the battery back up and shoot. the thing makes a wired noise and just stops. so i took the motor mount apart and the motor looks ok but there is a tiny plate that falls out and i soon find that the onld screw holding the grip over the moter had been stripped right off and i had screwed the stripped piece right up and this is what i beleive happened since there were scratch marks on the little plate. so then i soon find that i have blown a fuse, i thought my motor was fried can any one explain this to me? Thanx. O, and i am using a 8.4 3600mah battery, and it has a 30A 250V fuse in it.