|
I had a problem with my gun after upgrading it that the hopup didnt fit the inner barrel properly and was loosing seal around it, causeing my gun to shoot ~40fps less than it should. check your nozzle/cylinder/cylinder head/piston seal, by assembling it as it should go outside of the gun, pluging the nozzle with your finger and pushing the piston through. you should have a tight seal and not be able to push the piston all the way to the head. (you may be loosing seal arround the piston) if that is fine, then check the allignment with the hopup as well. I had read about a problem with G36's regarding the hopup not lining up proberly so if you search around you can probably find something to that regard.
|