Airsoft Canada - View Single Post - WE Hi-Capa 5.1 blowback problems

kaikai601 · October 3rd, 2006, 01:42

my stock WE Hi-Capa 5.1 is having some slide problems...

1. When I load up a mag with full gas and shoot, I can only get about 2 - 3 consecutive shots before the slide fails to cock back the hammer fully and load the next BB. I use green gas and it was room temperature...but I have to manually cock the slide back every 2-3 shots as the slide wouldn't go back all the way even on a full mag of gas.

2. my lastshot lock back mechanism doesn't seem to work correctly, I can't get it to lock back after the last shot....but it will work if i only load one BB into the mag and then load it into the chamber. if the slide won't block back after the last shot I can actually pull the slide back and it'll lock that way without going back to its original position (maybe the slide wasn't in the right position when the slide lock was triggered?)

Thanks!!

October 3rd, 2006, 01:42	#1
kaikai601 Trader rating Join Date: Oct 2006 Location: California	WE Hi-Capa 5.1 blowback problems my stock WE Hi-Capa 5.1 is having some slide problems... 1. When I load up a mag with full gas and shoot, I can only get about 2 - 3 consecutive shots before the slide fails to cock back the hammer fully and load the next BB. I use green gas and it was room temperature...but I have to manually cock the slide back every 2-3 shots as the slide wouldn't go back all the way even on a full mag of gas. 2. my lastshot lock back mechanism doesn't seem to work correctly, I can't get it to lock back after the last shot....but it will work if i only load one BB into the mag and then load it into the chamber. if the slide won't block back after the last shot I can actually pull the slide back and it'll lock that way without going back to its original position (maybe the slide wasn't in the right position when the slide lock was triggered?) Thanks!!