Airsoft Canada - View Single Post - Experiences with 6.01mm barrel and KSC Perfects

CuppoJava · October 17th, 2006, 01:20

Hey,
I'm about to buy a 7 inch barrel for my hi-capa, and needed to know about some people's experience with a 6.01mm barrel for use with
KSC Perfect .20s.

I read on redwolf that because of the extremely tight tolerances, KSC Perfects are not recommended and are known to jam. However this is in reference to AEG length barrels, and i'm not sure about the impact on a much shorter 7 inch barrel.

I'd be grateful if you could share your experiences with 6.01mm barrels, and the blessings or problems that you've encountered.

Thanks
-Cuppo

PS: Here's the barrel in question:
http://www.redwolfairsoft.com/redwol...p?prodID=19391

October 17th, 2006, 01:20	#1
CuppoJava Trader rating Join Date: May 2006 Location: Calgary	Experiences with 6.01mm barrel and KSC Perfects Hey, I'm about to buy a 7 inch barrel for my hi-capa, and needed to know about some people's experience with a 6.01mm barrel for use with KSC Perfect .20s. I read on redwolf that because of the extremely tight tolerances, KSC Perfects are not recommended and are known to jam. However this is in reference to AEG length barrels, and i'm not sure about the impact on a much shorter 7 inch barrel. I'd be grateful if you could share your experiences with 6.01mm barrels, and the blessings or problems that you've encountered. Thanks -Cuppo PS: Here's the barrel in question: http://www.redwolfairsoft.com/redwol...p?prodID=19391