Airsoft Canada - View Single Post

scoobabob94 · October 17th, 2006, 19:48

Ok, so I recently upgraded my sig 552 with a PDI 170% spring with standard reinforced gears and all the normal parts. I am still using the stock motor. So heres my questions, I purchased a 10.8 volt 1400 mAh battery for it, now this battery works fine on semi auto, but when turned to full auto the gun fires so fast that the magazine can't even feed. I am going to buy a new battery, but what I am wondering is if a 9.6 volt 1400 mah battery will also make the gun fire too fast. If that is the case I will have to stick to a 8.4 volt battery (I know the full auto on the gun works properly because I tested it with a 8.4 volt battery I had lying around).

October 17th, 2006, 19:48	#1
scoobabob94 Trader rating Join Date: Sep 2006 Location: USA	PDI 170% battery match up Ok, so I recently upgraded my sig 552 with a PDI 170% spring with standard reinforced gears and all the normal parts. I am still using the stock motor. So heres my questions, I purchased a 10.8 volt 1400 mAh battery for it, now this battery works fine on semi auto, but when turned to full auto the gun fires so fast that the magazine can't even feed. I am going to buy a new battery, but what I am wondering is if a 9.6 volt 1400 mah battery will also make the gun fire too fast. If that is the case I will have to stick to a 8.4 volt battery (I know the full auto on the gun works properly because I tested it with a 8.4 volt battery I had lying around).