Airsoft Canada - View Single Post

ILLusion · November 11th, 2006, 19:05

If you use the stock piston head, your fps will on average be about 7-10fps higher than using the Area1000 piston head (at 400fps), but it will not be as consistent. I recommend getting a ventilated bearing piston head. The Area1000 piston head is ventilated but has no bearings.

PDI has no m-rated springs. Wherever you saw that must be a typo.

November 11th, 2006, 19:05	#6
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	If you use the stock piston head, your fps will on average be about 7-10fps higher than using the Area1000 piston head (at 400fps), but it will not be as consistent. I recommend getting a ventilated bearing piston head. The Area1000 piston head is ventilated but has no bearings. PDI has no m-rated springs. Wherever you saw that must be a typo. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed