Airsoft Canada - View Single Post - ICS MP5 A4 dead, need help and diagnostic

Mud Gunner · December 13th, 2006, 13:22

well, you may have adjusted the motor too much and it is locked up inside the mechbox, I woudl try pulling the motor out and re adjusting it. Check for stripped/ damaged teeth on the motor gear itself...

Another issue that I recently dealt with was that we turned the motor adjustment screw too high and disconnected the power to the motor...

Both require minor assembly...

December 13th, 2006, 13:22	#2
Mud Gunner Trader rating Join Date: Sep 2004 Location: Edmonton	well, you may have adjusted the motor too much and it is locked up inside the mechbox, I woudl try pulling the motor out and re adjusting it. Check for stripped/ damaged teeth on the motor gear itself... Another issue that I recently dealt with was that we turned the motor adjustment screw too high and disconnected the power to the motor... Both require minor assembly... __________________ Proud owner of a pile of airsoft guns and kit with the credit card bills to prove it! Last edited by Mud Gunner; December 13th, 2006 at 14:37..