Quote:
Originally Posted by lizbob
Yes I agree with you, the charger could be more adapted for the need. No the battery did'nt came hot when I charged them : both 1800 and the 3600 Mh and yes I discharged them completely before the charging procedure.
I'm going to follow your advise and buy a good charger.
Anyway, I have a battery that is working on my TM AK-47 and won't work when I put it on the ICS MP5 A4 ? I have already change the fuse and the motor is connect on the battery (outside the pistol grip) but no running...
Any advise or thing to check ?
|
If you have alligator clips or other appropriate connectors, make a direct connection to your motor without any switchgear. If it runs better than thru the switchgear, then you have an electrical issue in the switchgear or wiring. Check the contacts between every connection and check the graphite block in the switch assembly for excessive scorching.
If your motor is still hinky with a direct connection, then kill a chicken on a full moon and wash half of the pinion gear in the liquid from the gall bladder. Place one drop of blood on the motor can and throw it away and replace the motor. Preferably with a TM one. I do this for all of my burnt out motors and find that only TM gets motor voodoo right. I have replaced maybe half a dozen other make motors (Eagle, SystemA, ICS) but never a TM one.