Airsoft Canada - View Single Post

beach_boy · December 18th, 2006, 02:25

Alrighty, so I've taken apart my ICS M4 split mechbox and replaced the yaw control bar, I got everything in line, closed the box and dropped it into my gun. Hooked the battery up, flipped it to semi and pulled the trigger... and everything worked, well the first shot did. It fires in full auto 100% still but when I switch from semi to full or vise versa the yaw control locks and hence locks the trigger(yaw control catches on the trigger mechanism and safety locks). I tested it a few times with the upper part off and noticed that the yaw control has a small amount of play side to side. I have an extra control bar kicking around so if I need to mod or something like that I can very easily. Any help would be great.

Thanks,
Beach_boy

(Random off shoot question: Oh and what's the compatibility with systema boxes and ICS?)

December 18th, 2006, 02:25	#1
beach_boy Trader rating Join Date: Jan 2005 Location: Prince George, BC	ICS Yaw Control Install... Alrighty, so I've taken apart my ICS M4 split mechbox and replaced the yaw control bar, I got everything in line, closed the box and dropped it into my gun. Hooked the battery up, flipped it to semi and pulled the trigger... and everything worked, well the first shot did. It fires in full auto 100% still but when I switch from semi to full or vise versa the yaw control locks and hence locks the trigger(yaw control catches on the trigger mechanism and safety locks). I tested it a few times with the upper part off and noticed that the yaw control has a small amount of play side to side. I have an extra control bar kicking around so if I need to mod or something like that I can very easily. Any help would be great. Thanks, Beach_boy (Random off shoot question: Oh and what's the compatibility with systema boxes and ICS?) __________________ We'll do it like the Italian Job! Last edited by beach_boy; December 18th, 2006 at 03:08..