Airsoft Canada - View Single Post

Death March · December 20th, 2006, 22:56

I have a ICS S.I.R. system on my ICS M4,I'm sure it's the same set-up.You could try and use a hardened steel screw,put it in a vice and drill a small hole for the pin to go through the end and try to get someone to Tack it in place so the pin stays in the screw(don't forget the little spring that goes under the head of the screw first!) Or you could try and see if WGCshop has parts kicking around? I'v fixed mine in place because I don't put a battery in it,I'v installed a G&P Crane stock so I don't have to mess with the S.I.R. system.Or see if one of the shops have the same part for the ICS S.I.R. system the part number for the ICS system is MA-12. Hope it gives you some ideas,Cheers!

December 20th, 2006, 22:56	#2
Death March Trader rating Join Date: Feb 2006 Location: Manitoba	I have a ICS S.I.R. system on my ICS M4,I'm sure it's the same set-up.You could try and use a hardened steel screw,put it in a vice and drill a small hole for the pin to go through the end and try to get someone to Tack it in place so the pin stays in the screw(don't forget the little spring that goes under the head of the screw first!) Or you could try and see if WGCshop has parts kicking around? I'v fixed mine in place because I don't put a battery in it,I'v installed a G&P Crane stock so I don't have to mess with the S.I.R. system.Or see if one of the shops have the same part for the ICS S.I.R. system the part number for the ICS system is MA-12. Hope it gives you some ideas,Cheers!