do you mean the seam is splitting? if so, just pop it apart and spread jb weld or devcon between the two seams and on the posts, careful not to get it on the rubber accents or the stock channel (divots where the stock locks in place INSIDE the stock houseing).
if you mean that the stock housing itself is loose on the body, all you need to do, it get a piece of sear stock (pin) drill out and tap both ends (just like the locking body pins on an m16) so you can cinch the body and stock together.
__________________
Age verifier southern Alberta
Quote:
Originally Posted by TokyoSeven
a Systema PTW is like KD, where the noodles are plated in gold and the cheese sauce is actually a pool of hot naked women.
|
|