Airsoft Canada - View Single Post

rc_p120 · January 7th, 2007, 04:32

I'm having the same problem with my KJW M9. Once the safety is put on it can't be disengaged because part #30 is still in a lowered position which prevents the hammer from falling. The only way to get the hammer to fall is to remove the slide and pull the trigger. Sometimes just through sheer luck it will fire or after some shaking and messing around with the gun.

I've tried lubing the part as most people have suggested but I don't think that's the problem. When I push the safety switch up something simply isn't catching, it's stuck on safe. Any help is appreciated. Thanks!

http://snowman.ascuk.net/kj-m9s.jpg

January 7th, 2007, 04:32	#5
rc_p120 Trader rating Join Date: May 2002 Location: Toronto, Canada	I'm having the same problem with my KJW M9. Once the safety is put on it can't be disengaged because part #30 is still in a lowered position which prevents the hammer from falling. The only way to get the hammer to fall is to remove the slide and pull the trigger. Sometimes just through sheer luck it will fire or after some shaking and messing around with the gun. I've tried lubing the part as most people have suggested but I don't think that's the problem. When I push the safety switch up something simply isn't catching, it's stuck on safe. Any help is appreciated. Thanks! http://snowman.ascuk.net/kj-m9s.jpg __________________ SILENT PULSE My archived Buy and Sell user ratings