Airsoft Canada - View Single Post

milehigh · January 20th, 2007, 13:42

Thanks a lot for the help guys. ILLusion, all your info is superb. I was thinking of going a bit overboard in buying mech box internals, but after a lot of reading I decided the simplest and most effective way to upgrade. I ordered a systema ballbearing spring guide, m120s spring, and a KA tappet plate (preventative maintenance).

On a side note, during my researching I noticed that the port on the m4 cylinder is just a tad closer to the back than the g36c cylinder. I figured it's not a huge deal because the 6.04 barrel should compensate a little.

January 20th, 2007, 13:42	#8
milehigh Trader rating Join Date: Dec 2006 Location: Victoria	Thanks a lot for the help guys. ILLusion, all your info is superb. I was thinking of going a bit overboard in buying mech box internals, but after a lot of reading I decided the simplest and most effective way to upgrade. I ordered a systema ballbearing spring guide, m120s spring, and a KA tappet plate (preventative maintenance). On a side note, during my researching I noticed that the port on the m4 cylinder is just a tad closer to the back than the g36c cylinder. I figured it's not a huge deal because the 6.04 barrel should compensate a little.