Airsoft Canada - View Single Post

yanhchan · February 14th, 2007, 09:56

I just went and upgraded my TM M4 yesterday. And I charged the battery and I went to test fire it today in my room. The mechbox seized up and seemed to only cycle very little I saw the air nozzle move about 2 milimeters. And then my gun comes to a complete stop. I try again and it doesn't even move a bit.

My gun currently has

Systema reinforced gears
Area 100 piston
KA M120 spring
Guarder air nozzle
EG1000 motor
8.4 battery

I think the most probable cause is the EG1000 motor not being able to put out enough torque or it could be due to the spring being too stiff.

I have a theory some how the anti reversal latch is locking things up because mine doens't really sit stright up but it sits more of at an angle and i have to tweek it everytime i close the mechbox.

February 14th, 2007, 09:56	#1
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	Super baffled by V2 mechbox seizing I just went and upgraded my TM M4 yesterday. And I charged the battery and I went to test fire it today in my room. The mechbox seized up and seemed to only cycle very little I saw the air nozzle move about 2 milimeters. And then my gun comes to a complete stop. I try again and it doesn't even move a bit. My gun currently has Systema reinforced gears Area 100 piston KA M120 spring Guarder air nozzle EG1000 motor 8.4 battery I think the most probable cause is the EG1000 motor not being able to put out enough torque or it could be due to the spring being too stiff. I have a theory some how the anti reversal latch is locking things up because mine doens't really sit stright up but it sits more of at an angle and i have to tweek it everytime i close the mechbox. __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy