Quote:
Originally Posted by CDN_Stalker
If the bushing is loose, grab a steel scribe (something metal that has a point on it) and a hammer. Lay that part of your mechbox on something flat, and gently hammer a divot about 1mm or a bit less around the bushing hole, at 12, 3, 6 and 9 O'Clock. Point is that the metal will spread into the hole a slight bit making the bushing fit tighter.
|
Ironically I just searched the bushing problem and your solution came up here and one time you described it to someone else too!!! 
Thanks I'll grab the nearest pointy object!
__________________
YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting.
Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy
|