Heya All
I get a consistant 270 fps out of this config W/.25 :banghead:
here's what's inside:
-EG1000 motor
-sp90 spring
-spring guide with bearing
-metal bushings
-prometheus cylinder head
-metal piston
-thight bore internal barrel
-9.6V 1700 mAh Nicad (it's got 20 amps of peak discharge rate, or so the paper sez)
stock cylinder
stock piston head
stock gears
here's what I know:
the barrel is brand new
the gearing + electrics are ok
the spring+guide are brand new
the shimming is surgical
-the hop-up is tired, and doesn't have any apparent effect.
-I think the rubber is not torn but i will have to check.
-the cylinder ensemble may not be so air-proof, but it
looks like it is.
does more grease add to efficiency?
-the feeding from the mag is not so trustable due to initial crappiness of the plastic receiver.
can air leak from there ?
this sucks because it's supposed to be an awesome rifle and now it's only a big piece of plastic
Anyway thanks for your help !
Long days and pleasant nights.
Jimski