Airsoft Canada - View Single Post

ringsted · March 29th, 2007, 12:19

funny this guy can put around 1460 mah into an 1500 cell when they are discharged to 7 V for at 9,6 pack

http://www.webx.dk/rc/elite1500.htm

oh my god they must be broken. his IB 1400 are the same they hold a litte less.

if you charge your batteries with 1/10 C or less and set the cut off more than 10 mv/c you can put as many Mah into a pack as you like since the charger wont shut down and the pack wont melt it will become maybe 30 degrees and then the rest of the energy will just dissappear as heat.

try to set your cut off to 3-5 mv/C and charge at 1 C then you will see the real capacity.

intellect batteries recommend a cut of of 5 mv/c so setting it to more may damage the pack. so you recommending a higher cut off will only make the pack hotter and increase the chance og breaking it.

March 29th, 2007, 12:19	#34
ringsted Trader rating Join Date: Sep 2006 Location: Denmark	funny this guy can put around 1460 mah into an 1500 cell when they are discharged to 7 V for at 9,6 pack http://www.webx.dk/rc/elite1500.htm oh my god they must be broken. his IB 1400 are the same they hold a litte less. if you charge your batteries with 1/10 C or less and set the cut off more than 10 mv/c you can put as many Mah into a pack as you like since the charger wont shut down and the pack wont melt it will become maybe 30 degrees and then the rest of the energy will just dissappear as heat. try to set your cut off to 3-5 mv/C and charge at 1 C then you will see the real capacity. intellect batteries recommend a cut of of 5 mv/c so setting it to more may damage the pack. so you recommending a higher cut off will only make the pack hotter and increase the chance og breaking it. Last edited by ringsted; March 29th, 2007 at 12:22..